• Customer service in 3 languages
  • Over 46 million magnets in stock
The product was added to your shopping cart.
Go to shopping cart

Neodymium magnet system Ø 66 mm black rubber-coated with threaded stud, holds approx. 25 kg

thread M8


Item number GTNG-66
Strength approx. 25 kg
Displacement force approx. 7,5 kg
Unit of Sale 1 piece
Price and rebate
1 pc. 9,86 EUR ea.
from 3 pcs. 8,67 EUR ea.
from 10 pcs. 7,61 EUR ea.
from 20 pcs. 7,09 EUR ea.
from 40 pcs. 6,64 EUR ea.
Ask for a rebate from 120 pcs.
incl. VAT plus shipping

9,86 EUR

incl. VAT plus shipping

promptly deliverable

Available: 26 205 pieces

Delivery time: 2-8 business days

Quant.

Description

This rubberised magnet system with threaded stud works great on delicate surfaces. The rubber coating not only protects against scratches but also increases the weight capacity in shear direction and makes it slip-resistant. The rubber protects the magnet from occasional moisture and splashes. However, with permanent outdoor use, rust may form. Our ferrite pot magnets, on the other hand, are rust-proof.

Compared to standard pot magnets without a rubber coating, this rubberised magnet system is thinner and more discreet. There is a steel plate under the rubber coating with 6 embedded magnets. They are arranged alternately with north and south pole facing up. As a result, you will be able to combine these magnet systems with each other. But please be careful, because once two of these magnet systems are fully joined, it will be very difficult to separate them again.

Please note:
If you want to reposition the magnet system, please do not attempt to remove it by dragging it along the mounting surface. This will damage the rubber coating. Instead, remove the magnet by tilting it with the help of a plastic handle. You can find a suitable handle for this magnet system linked below.

The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the magnet system makes direct and complete flush contact. Magnet systems already start to lose part of their adhesive force at a small distance from the ferromagnetic surface. This characteristic is more pronounced in magnet systems than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about magnet system characteristics.

Technical data

Article ID GTNG-66
EAN 7640155439909
Material NdFeB
Strength approx. 25 kg (approx. 245 N)
Displacement force approx. 7,5 kg (approx. 73,5 N )
Product version With threaded stud
Colour Black
Diameter D 66 mm
Pot height H1 8,5 mm
Total height H2 23,5 mm
Thread size M8
Tolerance +/- 0,5 mm
Covering Rubber (TPV)
Magnetisation N38
Steel Q235 (China)
Max. working temperature 80°C
Weight 110 g
PDF data sheet

The structure of magnet systems


In magnet systems, one or several magnets are mounted on a steel plate with alternating poles. This concentrates the adhesive force of the magnets on one side of the system which, in turn, has a positive effect on the adhesive force. The steel plate with the magnets is encased in rubber. For more information, please refer to our FAQ page on the characteristics of magnet systems.

Recommended accessories for this product

Load...
made of stainless steel A2, 100 pieces/UoS
1 UoS 17,91 EUR/UoS*
Available: 112 UoS
with slightly rounded ends
1 pc. 8,60 EUR ea.*
from 3 pcs. 8,20 EUR ea.*
from 10 pcs. 7,60 EUR ea.*
Available: 1 003 pcs.
made of steel C15, zinc-plated
1 pc. 2,92 EUR ea.*
Available: 252 pcs.
nut for T-slots, slot nominal dimension 10 mm, black
1 pc. 5,81 EUR ea.*
Available: 86 pcs.
metal discs with countersunk hole Ø 65 mm, as a counterpart to magnets, these are not magnets!
5 pcs. 1,34 EUR ea.*
from 15 pcs. 1,20 EUR ea.*
from 40 pcs. 1,10 EUR ea.*
from 80 pcs. 1,04 EUR ea.*
Ask for a rebate from 2 500 pcs.
Available: 2 120 pcs.